Die casting insulation boards

Insulation boards

Create the best conditions for an ideal thermal insulation of your die casting moulds. In addition to a comprehensive range of standard insulation boards in different variations, we also offer custom-made boards machined as per drawing.

INSULATION BOARD

Maximum precision through 0.02 mm parallelism
High-precision ground and available in the strengths 330 N/mm² and 600 N/mm²

Online shop

STANDARD RANGE

Comprehensive standard parts range in different variations
Ready-to-use, pre-drilled insulation boards are easily installed on the mould.

AS PER DRAWING

Manufactured to your requirements.

Technical specifications

	E 1400, E 1402, E 1403, E 1405, E 1407, E 1408	E 1420, E 1425, E 1440, E 1442	E 1450
Material	Composite from resin bonded glass fibres and fillers	Composite from resin bonded glass fibre fabric	Composite from resin bonded glass fibres and fillers, lattice pattern
Density	1.8 g / cm³	1.9 g / cm³	1.2 g / cm³
Max. temperature	230 °C	220 °C	200 °C
Thermal conductivity (λ)	0.18 W / mK	0.19 W / mK	0.09 W / mK
Compressive strength at 23 °C	330 N / mm²	600 N / mm²	100 N / mm²
Compressive strength at max. temp.	110 N / mm²	340 N / mm²	80 N / mm²
Bending behaviour at 23 °C	200 N / mm²	340 N / mm²	150 N / mm²
Tensile strength at 23 °C	70 N / mm²	300 N / mm²	—
Coefficient of linear expansion	20 10^-6 / K	15 10^-6 / K	—