Marking stamps for optimum parts identification |

Depending on the conditions in the mould, different types of marking stamps are used. In addition, you also have the option to choose special types. Discover our comprehensive range.

To the products Overview of marking stamps

Standard marking stamps, long

Available as variants with and without height adjustment of the arrow insert (with fixed height)
Quick and easy operation from the split line face
Many diameters and marking variants available
Can be screwed from the back side
Matching arrow insert: E 2410

Our tip for thin-walled parts – Stamps with fixed height

Stamps with fixed height are particularly suitable for the marking of thin-walled and technically sophisticated parts.

Prevent the forming of an unwanted step between the arrow insert and the main body
Installation and removal from the split line face possible thanks to wrench socket in the base body

Installation

E 2400

E 24005

Standard marking stamps, short

Due to their low height, the space-saving short stamps are particularly suitable for use in thin cavity plates.

They are pressed directly into the insert and can also be glued in place if necessary. Do not press the arrow insert when installing. This should either be removed or inserted into a suitable installation sleeve before installation.

Quick and easy operation from the split line face
Many diameter and marking variants are available
Matching arrow insert: E 2430

Installation

E 2420

Marking stamps with latching function

The arrow insert latches into defined positions. This has the advantage that even at high injection pressures, the arrow insert cannot rotate automatically.

Fixed arrow position through the latching of the arrow insert
Can be used at temperatures up to 340 °C
With fixed height
Easy installation and removal from the split line face

Short version

The stamp is pressed directly into the insert and can be removed from the split line face using a screw.

E 2420 R

Installation

Do not press the arrow insert when installing. This should either be removed or inserted into a suitable installation sleeve.

Removal

Easy removal from the split line face with the withdrawal thread in the main body of the stamp.

To the video instructions

Long version

Installation and removal from the split line face possible thanks to hexagon socket in the base body. The marking stamps can be changed directly on the injection moulding machine.

E 24005 R E 24045 R

Installation

To the video instructions

Multi-stamp

Mark your components with month and year numbers using a single stamp. Thanks to six year dates on this stamp, you save changing the arrow insert at the turn of the year.

Time saving when setting month and year on only one stamp
Fixed arrow position through the latching of the arrow insert with fixed height

E 2420 MR

Setting

Set the year: Turn to the right
Set the month: Turn to the left

Installation

Labelling stamps

Pressed or glued directly into the insert
Marking with CE, food safety and recycling symbols
Labelling stamp with recycling code for 6 different types of plastic in accordance with DIN 6120

E 2460 E 2465