Inserts Insert Change mould

How you benefit

Time saving when changing inserts and ejector set directly on the injection moulding machine
Thanks to ready-to-use change inserts, machining of the cavity can begin immediately
New projects are paid off in a short time, as only inserts need to be ordered and machined

More

Anti-rotation blocking prevents incorrect installation of the change inserts on the fixed half and the moving half
Close
More

Integrated eye bolt threads for safe transport
Close
More

Position wedges enable precise positioning of the change inserts
Close
More

Sturdy and durable design due to solid change mould cavity plates on both the fixed half and the moving half
Close
More

Fully adapted ejector set guiding
Close
More

Cooling holes are already provided on the change mould cavity plates
Close

Mould sizes and change inserts

We offer ready-to-use change inserts in the material grades 1.2311, 1.2714HH and 3.4365. For further material grades, refer to our matching NF 2660 inserts.

Mould size	W	L
	156	196
	156	246
	196	246
	196	296
	246	296
	246	346
	296	346

Change inserts	W	L	T
	100	140	25/32/40/50
	100	190	25/32/40/50
	130	180	32/40/50/60
	130	230	32/40/50/60
	170	220	40/50/60/70
	170	270	40/50/60/70
	210	260	50/60/70/80

Change the insert in a few steps

Step 1

Uncouple the ejector set from the machine with the coupling (1) or screw connection (2). Remove the fastening screws (3) on the inserts.

Step 2

Loosen the screws (4). Pull off the positioning wedges with the help of the set screw (5).

Step 3

Pull out the change insert with the attached ejector set using the FW 1500 mounting device or screws.

Step 4

Put in the new change insert and tighten the fastening screws (3) slightly. Turn the set screw (5) to its initial position. Tighten the positioning wedges with screws (4).

Step 5

Tighten the change inserts with screws (3). Couple the ejector set to the machine.

Design wizard for change moulds

Complete mould bases and die sets, assistance in the selection of suitable components, and more with just a few clicks – our convenient change mould wizard is there to support you both in the web shop and in our offline shop.