Kontakt

Za Vas smo dostupni od ponedeljka do petka od 8:00 do 17:00 časova. Preko ovog linka možete pronaći kontakt osobe za Vaš region.

Sedište u Wolfurtu
+43 5574 6706-0

Vaše kontakt osobe

SHOP

Korpa {{ (warenkorbCtrl.warenkorb.bestellNummer ? (' [' + warenkorbCtrl.warenkorb.bestellNummer + '] ') : '' )}} | {{warenkorbCtrl.warenkorb.items.length}} Artikal Izmena pregleda korpe

Primedba

Slika

Artikal

kom.

Cena za jedan komad

Ukupna cena

Ukupna cena uklj. popust

{{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben:[{attrPrefix: 'L_', searchPattern: '/...', replacePrefix: '/', replaceSuffix: ''}] }} {{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben}}

{{attributwertEingabe.attributBezeichnung}}

{{hannexItem.Bezeichnung}}

: Prijavite se da biste videli svoje cene i nastavili da naručujete.

Are you interested in our company and our products? Then you’re in the right place.

NEW from Meusburger: Blocks for eroding with starting hole

09.10.2018, Mould making Die making

For wire EDM, a starting hole in the block for eroding is advantageous since otherwise the EDM contour cannot be optimally determined and it leads to high wear if the wire is introduced from the side. That's why Meusburger now provides the new NE-Blocks for eroding with customisable starting holes.

At Meusburger, the position of all starting holes – with Ø of 1 mm – is freely configurable. Up to 10 starting holes can be defined, depending on the subsequent EDM contour. This guarantees maximum flexibility in the design. The selection is done in just a few steps in the Meusburger web shop or offline shop. First the suitable block for eroding is selected. This is available in 7 different materials, in heat treated or hardened versions, as well as in many different sizes. Then a window automatically opens, asking if starting holes should be defined. If this is confirmed with a YES, the X and Y coordinates for the respective starting holes can be entered quickly and easily.