Kontakt

Za Vas smo dostupni od ponedeljka do petka od 8:00 do 17:00 časova. Preko ovog linka možete pronaći kontakt osobe za Vaš region.

Sedište u Wolfurtu
+43 5574 6706-0

Vaše kontakt osobe

SHOP

Korpa {{ (warenkorbCtrl.warenkorb.bestellNummer ? (' [' + warenkorbCtrl.warenkorb.bestellNummer + '] ') : '' )}} | {{warenkorbCtrl.warenkorb.items.length}} Artikal Izmena pregleda korpe

Primedba

Slika

Artikal

kom.

Cena za jedan komad

Ukupna cena

Ukupna cena uklj. popust

{{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben:[{attrPrefix: 'L_', searchPattern: '/...', replacePrefix: '/', replaceSuffix: ''}] }} {{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben}}

{{attributwertEingabe.attributBezeichnung}}

{{hannexItem.Bezeichnung}}

: Prijavite se da biste videli svoje cene i nastavili da naručujete.

In our selected range you can find the right material for virtually any application.

1.2714 HH Steel for through hardening

Designation

DIN:	55 NiCrMoV 7
AFNOR:	55 NCDV 7
UNI:	-
AISI:	L6

Chemical composition:

C	0.56
Cr	1.10
Mo	0.50
Ni	1.70
V	0.10

Strength:

40 - 43 HRC
(≈ 1250 - 1400 N/mm²)

Thermal conductivity at 100 °C:

36 W/m K

Character:

steel for through-hardening with good heat resistance, hardenability and toughness

Application:

Inserts, cores and slides for injection moulds

Treatment by

Polishing:
technical polishing possible

is possible:
EDM, nitriding, etching and hard chroming

Heat treatment:

Soft annealing:
650 to 700 °C for about 4 to 5 hours; slow controlled cooling of 10 to 20 °C per hour to about 600 °C; further cooling in air, max. 248 HB

Hardening:
950 to 980 °C
15 to 30 minutes keeping curing temperature
quenching in water/oil
obtainable hardness: 56 HRC

Tempering:
Slow heating to tempering temperature immediately after hardening. Minimum time in furnace: 1 hour per 20 mm part thickness

Annealing graph: