New from Meusburger: E 1307 Fine centering unit, flat for high-precision centering of inserts

The new E 1307 Fine centering unit, flat from Meusburger features minimal installation space which provides for maximum space utilization within the insert. Through the DLC coated centering elements available with or without fixing holes the designer enjoys maximum flexibility during design, and the wear is reduced to a minimum.

The best way to compensate the thermal expansion between the inserts and the cavity plate with milled pocket is to place the centering element directly at the cavity. However, designers often have to cope with very little space available for introducing the cavity when designing the inserts. To achieve exact centering of the individual inserts, Meusburger set themselves the goal of developing a centering element that is as small as possible but still equipped with technical refinements: the E 1307 Fine centering unit, flat. The product features compact design with defined installation positions, which prevents incorrect mounting of the respective centering parts. The hardened and DLC-coated fine centering unit ensures minimal wear and is ideal for use in cleanrooms. The large chamfer on the contact surface of the centering parts allows the introduction of corner radii for better hardening results on the insert and at the same time facilitates assembly. In addition, the withdrawal thread facilitates disassembly. The fine centering unit, flat is available in 2 versions with 2 sizes each: the E 13076 with mounting holes as ready-to-use variant and the E 13070 without mounting holes for individual adjustment to the required dimensions on a specific insert. The data is available in the online shop and with just a few clicks ready for download and export to the respective CAD system.

To the press overview