Kontakti

Na voljo smo vam od ponedeljka do petka med 8:00 in 17:00 uro. Na tej povezavi najdete kontaktne osebe za svojo regijo.

Centrala Wolfurt
+43 5574 6706-0

Vaša kontaktna oseba

Trgovina

Košarica {{ (warenkorbCtrl.warenkorb.bestellNummer ? (' [' + warenkorbCtrl.warenkorb.bestellNummer + '] ') : '' )}} | {{warenkorbCtrl.warenkorb.items.length}} izdelek Zamenjaj košarico

Opomba

Slika

izdelek

Kos

Cene po pozicijah

Skupna cena

Skupna cena s popustom

{{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben:[{attrPrefix: 'L_', searchPattern: '/...', replacePrefix: '/', replaceSuffix: ''}] }} {{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben}}

{{attributwertEingabe.attributBezeichnung}}

{{hannexItem.Bezeichnung}}

Prosimo vas, da se prijavite, da bi lahko videli vaše cene ter nadaljevali z naročilom.

Naš izbran nabor omogoča za skoraj vsak primer uporabe ustrezen material.

1.2714 Steel for through hardening

Designation

DIN:	55 NiCrMoV 7
AFNOR:	55 NCDV 7
UNI:	-
AISI:	L6

Chemical composition:

C	0.56
Cr	1.10
Mo	0.50
Ni	1.70
V	0.10

Strength:

max. 250 HB
(≈ max. 850 N/mm²)

Thermal conductivity at 100 °C:

36 W/m K

Character:

steel for through hardening, with high temperature resistance, through hardenability and toughness

Application:

extrusion dies, hot-forging tools, dies for processing tin, lead and zinc alloys

Treatment by

Polishing:
technical polishing is possible

is possible:
EDM, nitriding, etching and hard chroming

Heat treatment:

Soft annealing:
650 to 700 °C for about 4 to 5 hours; slow controlled cooling of 10 to 20 °C per hour to about 600 °C; further cooling in air, max. 248 HB

Hardening:
950 to 980 °C
15 to 30 minutes keeping curing temperature
quenching in water/oil
obtainable hardness: 56 HRC

Tempering:
slow heating to tempering temperature immediately after hardening; minimum time in furnace: 1 hour per 20 mm part thickness