Kontakti

Na voljo smo vam od ponedeljka do petka med 8:00 in 17:00 uro. Na tej povezavi najdete kontaktne osebe za svojo regijo.

Centrala Wolfurt
+43 5574 6706-0

Vaša kontaktna oseba

Trgovina

Košarica {{ (warenkorbCtrl.warenkorb.bestellNummer ? (' [' + warenkorbCtrl.warenkorb.bestellNummer + '] ') : '' )}} | {{warenkorbCtrl.warenkorb.items.length}} izdelek Zamenjaj košarico

Opomba

Slika

izdelek

Kos

Cene po pozicijah

Skupna cena

Skupna cena s popustom

{{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben:[{attrPrefix: 'L_', searchPattern: '/...', replacePrefix: '/', replaceSuffix: ''}] }} {{warenkorbItem.bezeichnung | artikelBezFilter:warenkorbItem.attributwertEingaben}}

{{attributwertEingabe.attributBezeichnung}}

{{hannexItem.Bezeichnung}}

Prosimo vas, da se prijavite, da bi lahko videli vaše cene ter nadaljevali z naročilom.

Speed Lap Set

V 76860

Opis izdelka

Vse oblike Speed Lap sistema
Trdi diamantni nosilec paste za lepanje
V praktičnem plastičnem kovčku

E Information about the Meusburger Speed Lap system on page

Izbira artikla

Informacije o izdelku

Priporočeni izdelki

Izbira artikla

		Set	Ozn. Št.	Cena / Kos	Količina
		V 76862/4x 4/140 - 1 pc V 76862/6x10/140 - 1 pc V 76862/8x 8/140 - 1 pc V 76863/3/ 50 - 2 pcs V 76863/5/140 - 1 pc V 76863/8/140 - 1 pc V 76866/V1/4 - 5 pcs V 76866/V1/5 - 5 pcs V 76866/V1/6 - 5 pcs V 76866/V1/8 - 5 pcs V 76866/R1/4 - 5 pcs V 76866/R1/5 - 5 pcs V 76866/R1/6 - 5 pcs V 76866/R1/8 - 5 pcs V 76866/D1/6 - 5 pcs V 76866/D1/8 - 5 pcs V 76868/2,5 - 1 pc V 76868/3,3 - 1 pc	V 76860/Set	193,00 € 139,00 €

Informacije o izdelku

Tehnični nasvet

E The Meusburger Speed Lap System

The speed lap system comprises of pads and bars for applying diamond compounds in order to obtain high surface quality while saving time.

New composite material
Prevents the washing out of soft constituents and the formation of built-up edges
Higher material removal rate (compared to other lapping techniques)
Less sensitive to pressure
Enables consistent, scratch-free lapping
Sturdy lapping bars

Technical information

Preparing the lapping pads:
Before using the lapping pads for the ﬁrst time, use a ﬁne abrasive paper or diamond foil to hone them.
Preparing the lapping bars:
Adjust the lapping bars to the shape of the surface on which you are going to use them; this can be done with sanding discs, abrasive paper or ﬁles. You can use a collet to hold circular lapping bars.
Grit:
The optimum grit size is 6 μm but you can also use a coarser grain structure. If required, you can lap to 3 μm.
Lubrication:
You can use VLM 5 Cutting ﬂuid or VLM 20 Polishing oil for thinning the diamond compound.
Pressure:
For 60–70% of this work step, apply light pressure; for the rest of the time, that is: for ﬁnishing, do not apply any pressure.
Hand-filing machine:
Speed: 4.000-7.000 min^-1
Stroke length: 0.5-1.0 mm